FiberSteel FEATURES |
|
| Floatation |
- High Density Polyethylene Tanks For Superior UV And Freeze Protection
- Carbon Black Finish Compliments Dock Floatation And Is Easy To Clean And Maintain
- HDPE Construction* Provides Extra Buoyancy When The Tanks Are Submerged Minimizing Stress On The Dock Structure
- Fully Enclosed And Structurally Reinforced Bottom Prevents Tank Damage In The Event The Lift Rests On The Bottom
- Frame And Tank Are Attached Using The Ultra-Tech Bonding System Eliminating Any Steel Components Below The Water Line
- 30" Tank Depth Prevents Pressure Loss In Rough Water Or An 18" Tank For Use In Shallow Water Applications*
- Tank Safety Shut Off Valve Prevents Air Loss In The Event Of A Hose Failure
* HDPE construction used on standard depth tanks with white FRP construction used on shallow water lifts
** Tanks are standard black but can be made any custom color for an additional charge of $400.00 |
|
| Steel Frame Work |
- 4" Wide Axle Loops With UHMW Bushings Along With Stainless Steel Arm And Stabilizer Bushings Reduce Wear And Noise
- Galvanized Steel Bolting Hardware And Stainless Steel Locknuts Are Superior To Zinc Coatings For Longevity
- Torsion Clamps And Square Axles And Arms Prevent Axle Twist Common To Round Pipe Axles
- Full Length Angle Iron Support Of Bunk Rails And The Use Of Structural Steel Offers Greater Hull Support
- Increased Frame To Tank Contact Reduces Pounds Per Square Inch Load As Compared To Tube Style Lifts
|
|
| Blower Assembly |
- Weather Proof Lockable Deck Mounted Housing Safeguards Controls From Unauthorized Use
- Ground Fault Interruption Protection With An Additional GFIC Outlet For Dockside Use
- Automatic Discharge Valve Protects Motor From Water Ingestion And Allows The Lift To Lower Quicker
- Two Stage Blower With Sealed Bearings For Faster Lifting Than Single Stage Blowers
|
|
| Lifetime Warranty |
- LIFETIME (Parts and Labor) on Tanks, Frame, Tank to Frame Connectors, and Polyethylene Bunks
- 5 Years on Blower Motor, Electrical, and HDMW Axle Bushings
- 5 Year Structural Steel Warranty (other steel parts of lift)
|
| Click thumbnails for larger view |
|
|
|
Single PWC |
Twin PWC |
4,800-6,800-8,000 lbs. |
|
|
|
10,000 lbs. |
12,000 lbs. Combo Bunk System |
12,000-16,000 lbs. |
|
|
|
20,000 lbs. |
Pontoon Bunks |
Offset in Well |
|
| FiberSteel Boat Lift Options |
- Remote Control Units
- Tri-Toon Bunk Setup
- Rough Water Stop Kit w/ Hull Protectors Available
- Combination V Bunk And Pontoon Bunk Systems
|
|
|
|
 |
All of the steel components remain above the water line preventing corrosion.* |
|
12" width distributes load over a large area for rough water applications |
|
Bolting the frame to the tank eliminates wear from shifting in rough water. |
|
Stainless steel bushings and locknuts offer superior wear resistance over standard zinc hardware and bushings |
|
Clamp style dock bracket eliminates drilling into the dock frame-work |
* On Selected Models Only |
 |
|
PWC |
********** |
3000
low water |
********** |
4800 |
********** |
6000
low water |
********** |
6800 |
********** |
8000 |
********** |
9000
low water |
********** |
10000 |
********** |
12000
4-arm |
********** |
12000
6-arm |
********** |
12000
low water |
********** |
14000 |
********** |
16000 |
********** |
20000
6-arm |
********** |
20000
8-arm |
|
|
|
|
